All Reviews

The reviewer briefly mentions the Bike Road Bicycle Hydraulic Disc Brake | Hydraulic Brake Calipers Gravel - Bike Road but does not provide detailed analysis.

The reviewer mentions they are currently running Schwalbe G-One Allround tires in 40mm size on their gravel bike. They note there is plenty of clearance in both the fork and rear seat stays, suggesting the frame could accommodate larger tires up to 45mm or even 50mm if desired. The tires are part of a tubeless setup that the reviewer switched back to after issues with TPU inner tubes.

The reviewer discusses the RYET 3D printed saddle as one of the components that exceeded their expectations. They highlight its comfort and quality, noting it provides great comfort on long rides. The saddle is described as a great addition to a gravel bike due to its performance and value.

The reviewer discusses their experience with the RideNow TPU inner tubes, which they initially wanted to like due to their small size, affordability, and lightweight nature. However, they encountered performance issues, with both tubes developing slow leaks after relatively short distances (200 km for the first and 300 km for the second). This led them to abandon the tubes in favor of tubeless setups.

The reviewer discusses the ZTTO SLR Gen3 11speed Road Bike Cassette as a replacement for their worn-out monoblock steel cassette. They mention it is incredibly lightweight at just 122g and is the latest generation from ZTTO, referred to as the SLR Gen3. However, they express concerns about its durability, particularly due to the aluminum teeth on the first three sets, which they expect to wear out quickly. They plan to test it and provide updates on its performance.

The reviewer discusses their experience with a ZTTO monoblock cassette, which appears to be the ZTTO Ultimate 11/12 Speed Road Bike Cassette, though the exact model name isn't explicitly stated. They mention purchasing it for £66 and highlight its lightweight design at 200g, comparable to Shimano Dura-Ace. The cassette initially shifted well but wore out after approximately 2,500 miles, with the eighth gear becoming completely unusable. The reviewer conducted a hardness test comparing it to Shimano cassettes, finding the ZTTO's steel hardness relatively good but less uniform in hardening. They note the cassette has a basic black oxide coating rather than the more durable nickel plating found on Shimano products. The reviewer replaced it with a newer ZTTO SLR Gen 3 model but expects even lower durability due to aluminum teeth on the smaller cogs.

The reviewer discusses the ELITEWHEELS Carbon Wheels ENT 2.0 extensively, highlighting their performance, upgrades from the original ENT model, and overall value. They mention riding over 1,500 km with these wheels and note significant improvements in ride smoothness, responsiveness, and durability. The reviewer also touches on the affordability of these wheels compared to premium brands like ZIP, and praises the customer service and quality control of Elite Wheels.

The HUALONG Carbon Side Load Bicycle Water Bottle Cage is discussed as a side-loading option that positively surprised the reviewer. They mention it is quite astonishing, with a nice fit for bottles, a sturdy and high-quality feel, and an attractive appearance with a little blue logo on the edge. It comes with black stainless steel screws and a little tool for installation. The reviewer notes it is almost half the weight of the center-loading version from the same brand, weighing only 21g, which justifies its higher price. However, it is almost twice the price of the center-loading version, costing €12.43. The reviewer recommends it for specific needs like bike packing bags under the top tube.

The reviewer discusses the ODI Ultralight 18g Bicycle Water Bottle Cage Titanium Alloy MTB Road Bike Water Bottle Holder Durable Mountain Cycling Cup Rack as one of the bottle cages in the review. They mention that it is a titanium bottle cage with a darker tone of titanium, but express disappointment with its quality. The welds are described as bubbly and not smooth, and the screws provided are criticized as being the worst they have ever seen, with one rounding off immediately during installation. The fit of the bottles is also not great, working only barely with normal plastic bottles and not fitting at all with insulated bottles. Despite the high price of €9.66, the reviewer does not recommend this bottle cage.

The reviewer discusses the WEST BIKING Bottle Holder as the second bottle cage in their review. They note that it is a plastic bottle cage and mention that it did not come with bolts, which they found unusual. The reviewer states that the material feels extremely cheap, like some of the cheapest plastic available for manufacturing such items. They acknowledge that the fit of the bottles was quite okay, but overall, they criticize the quality and feel of the product, despite its low price of €2.47.

The reviewer discusses the RIDERACE Lightweight Bike Bottle Holder Aluminium Alloy Bicycle Water Bottle Cage as the third cheapest option in their review. They note that it is an aluminum bottle cage with a price of €2.83. The reviewer mentions that the quality of the finish is quite bad, with rough edges and chipping paint. They also highlight that the fit of the bottles is horrendous, with the cage being way too small for standard bottles, causing too much friction. Despite being lightweight at 21g, the reviewer concludes that the bottle cage is not recommended due to its poor quality and fit.

The reviewer discusses the N2 Water Bottle Holder Nylon Cage as the fourth bottle cage in their review. They note that it is a nylon bottle cage, which is a step up from the previous cheaper options. The reviewer mentions that it is quite inexpensive at €39 and praises the quality of the material, which is much better than the previous bottle cages. They highlight that the fit of the bottles is quite great, with some inherent wobble due to the nylon material, but it is not too stretchy. The reviewer also notes that it is lightweight at 22g, even lighter than some of the current options. They recommend it for those who have a cheap city bike or a cheap bike build and do not want to splurge too much on bottle cages.

The reviewer discusses the ZTTO W316 MTB Aluminum Alloy Bicycle Water Bottle Cage as part of their review of 10 different bottle cages. They describe it as the 'better brother' of the Ride Race bottle cage, noting its aluminum construction and improved manufacturing quality. The reviewer highlights its reasonable price point, good fit for bottles, and overall decent quality for an inexpensive option. They mention it feels sturdy and well-made compared to cheaper alternatives, though it is heavier than some other options.