All Reviews

A user reports that updating the Magene PES P515 power meter to firmware v0.118 caused it to get stuck at 0W and fail calibration. Magene support provided a force reset method using nRF Connect to send a 'reset' command via the Nordic UART Service. The fix resolved the issue for the original poster, but other users report persistent connectivity problems and bricked units even after the reset. Some users advise against updating, and there are complaints about poor support and app limitations.

The Seraph TT-X42 is a Chinese carbon road bike purchased by the user, who upgraded from a gravel bike and reports significant performance improvements. The bike came with a Wheeltop groupset and stock components except for saddle, pedals, and brake rotors. The user experienced minor issues: chipped paint on the fork (refunded €80) and a misplaced seatpost clamp. The rear tire maxes at 30c, front at 32c. Frame weight is not measured, but total weight can be reduced to ~7.5-8.5 kg with wheel and drivetrain upgrades. The user plans to upgrade wheels to EliteWheels ENT 2.0 82mm deep and tires to 30/32c.

A user shares a 1-year review of their DIY AliExpress road bike built on a TFSA JH-33 frame, covering build specs, reliability, performance, and lessons learned.

The X-Lab RS7 is a carbon road bike with full mechanical Shimano 105, carbon wheels, integrated cockpit, and power meter for $2,100. While it offers exceptional value, concerns include maintenance difficulty due to internal cable routing through the headset, aggressive racing geometry, and potential reliability issues common with direct-to-consumer brands. The bike is a strong contender for budget-conscious riders who prioritize specs over convenience.

The subreddit r/ChineseCarbon discusses the XLAB RS7, a carbon bike with mechanical 105, power meter, and drop bars for $2100. Users are intrigued but have concerns about low stack height, internal cable routing, and chainring options. Some early owners report positive experiences with comfort and performance.

A user shares their positive experience with the LightCarbon LCG071-PRO frame, highlighting its quality, custom paint option, and overall value when built with Elite wheels and a Shimano GRX 820 groupset. The ordering process was smooth, with responsive sales reps and a turnaround time of about two months. The bike was built for under $2000 total.

A user shares a positive update on their Carbonda CFR-1056 frame after many miles. They praise the ride quality, geometry, tire clearance, and customer service. The frame allows 35mm tires, has a comfortable geometry with high stack and short reach, and the total cost including shipping to USA was about $900.

A customer had a poor experience purchasing a complete road bike from QuickPro. The order arrived late, with the wrong groupset, and after a service attempt, the bike returned with multiple issues including frame damage, incorrect brake routing, missing parts, and poor assembly. Despite initial customer service responsiveness, the resolution process was lengthy and frustrating, ultimately resulting in a full refund after nearly two months.

The BXT 135 gravel build by user NicBy features a Chinese carbon frame with electronic groupset and 50mm wheels, costing 1850 euros. The build received positive feedback on Reddit, with users discussing components like Wheeltop groupset and CSC wheels.

A Reddit user shares their experience building a custom gravel bike using the Mondince FM296 frame, a full carbon fiber gravel frame that is also used by State Bicycle Co. for their All Road Carbon V2 model. The bike, named 'Midnight,' weighs 8.2 kg and cost $3,816 to build. The user praises the frame's quality, customization options, and value, noting that Mondince manufactures frames for well-known brands like State, Cube, and Argon18.

The GEOID PM500 cycling power meter is a budget-friendly option that appears to be a rebranded Magene P505 or P515 spider-based power meter. User tests show accuracy comparable to Garmin Rally pedals and direct drive trainers, but some concerns exist about potential offset shifts after high-power efforts, though not confirmed for this model. It is heavier than standard cranksets but offers good value for a second bike.

A Reddit user tested the Geoid PM500 power meter against a Tacx Neo 2T trainer and found it tracks well overall, with no offset issues after high-power efforts. It appears more responsive than the trainer but showed some cadence drops and a power drop without cadence change. Installation is straightforward, similar to Shimano cranks. However, a commenter noted the power scaling feature does not work, which is a drawback for users needing calibration.

The Mondince FM336 is an open mold carbon gravel frame from Mondince, built by user Igital with high-end components. The build features a purple pearl color, SRAM Rival XPLR 13-speed groupset, Serenade wheels, and Schwalbe tires. The user shares their experience and answers questions about the frame, components, and performance.

The Spcycle G058 carbon gravel frame has been used for a year with a Wheeltop GEX groupset and Elite carbon wheels. The user is 186cm and rides a large size. The frame is praised for its deep purple metallic paint, endurance geometry, and bikepacking compatibility. Assembly was manageable, though routing hydraulic brakes with integrated handlebars was tricky. The saddle clamp allows tilting. The Wheeltop GEX performed well, but shifting with a ZTTO cassette is not as crisp as Shimano. Overall, the user is satisfied and would choose Chinese carbon again, but notes it requires DIY skills.

The Mondince FM336 is a Chinese carbon gravel bike frame built up with high-end components including SRAM Rival XPLR 13s, custom wheels, and Schwalbe tires. The owner reports good geometry and frame quality but notes a discrepancy in tire clearance advertised vs actual.