BCR - The Cheapest Bike Tool Kit I’d Actually Trust (AliExpress)

The reviewer discusses the AliExpress derailleur hanger alignment gauge at multiple points in the video. They state they have used it for nearly four years and find it fantastic. They demonstrate its use by checking the alignment on the Cannondale frame, explaining the process of comparing the top and bottom of the wheel to see if the hanger is bent. They note it is exactly the same as any other alignment gauge and is used for straightening minor bends or determining if a hanger needs replacement.

AI-Summary

Pros

The reviewer has used it for nearly four years.
They describe it as 'fantastic' and 'awesome'.
It is stated to be exactly the same as any other derailleur hanger alignment gauge.
It is considered a great value, costing around £20.

Cons

No specific negative points or cons are mentioned about the tool itself.

Key Points

The reviewer has used it almost daily for four years.
The tool is used by spinning it to the top of the wheel, pushing it in, and setting an elastic band.
Alignment is checked by swinging it to the bottom of the frame to see if the elastic band meets the wheel.
It can be used for leverage to straighten minor bends in aluminum hangers.
Aluminum work-hardens, so the reviewer advises that after one straightening, it's time to replace the hanger to prevent snapping.

Last checked:

4 days

ago

New 4Pcs 135mm Car Auto Vehicle Oil Seal Screwdrivers Set O-Ring Seal Gasket Puller Remover Pick Hooks Repair Tools for car

Created: January 13, 2026

The New 4Pcs 135mm Car Auto Vehicle Oil Seal Screwdrivers Set O-Ring Seal Gasket Puller Remover Pick Hooks Repair Tools for car is not mentioned in this video.

AI-Summary

🇺🇸

$3.07

🇫🇷

€2.61

🇬🇧

£2.37

Last checked:

4 days

ago

Removable Presta Valve Core Brass Tubeless Bike Valve Replacement with Remover Tool for Road and MTB Bicycle Wheels

Created: January 13, 2026

The Removable Presta Valve Core Brass Tubeless Bike Valve Replacement with Remover Tool for Road and MTB Bicycle Wheels is not mentioned in this video. The video is a review of various cheap tools from AliExpress, focusing on their performance during a bike strip-down. The only valve-related item mentioned is a standard Presta to Schrader valve adapter that was found on the bike, not the specific removable core valve product.

AI-Summary

🇺🇸

$4.62

🇫🇷

€3.99

🇬🇧

£3.20

Last checked:

4 days

ago

SUKOU Bicycle Tire Seat Laser Aligner Handlebar Laser Pointer Seat Center Adjuster Measurement Tool Kit

Created: January 13, 2026

The SUKOU Bicycle Tire Seat Laser Aligner Handlebar Laser Pointer Seat Center Adjuster Measurement Tool Kit is not mentioned in this video.

AI-Summary

🇺🇸

$9.97

🇫🇷

€7.39

🇬🇧

£6.40

Last checked:

4 days

ago

BIke mtb Bearing Press Set For Wheels/Hub Bearing Installation Bicycle Soft Tail Frame Turning Point Bearing Hub Assembly Tool

Created: January 13, 2026

The reviewer discusses a bearing press set for installing bearings into hubs, suspension bushes, and other bicycle components. They mention they no longer use this specific set, having upgraded to Park Tool alternatives, but state that for a home mechanic performing such tasks once or twice a year, it will work perfectly well. They describe it as a kit with loads of different sizes for different bearings and a basic handle to wind it in.

AI-Summary

Pros

Works really, really well.
Has loads of different sizes for different bearings.
Will work absolutely perfectly for a home mechanic doing the job once or twice a year.
Really, really good stuff.
Not very expensive compared to pro-level grade.

Cons

The reviewer no longer uses it, having upgraded to Park Tool alternatives for wheels and suspension bushes.
It is described as a 'basic press' with a 'basic handle'.

Key Points

Used for fitting bearings into hubs, suspension bushes, etc.
Contains many different sizes for different bearings.
Uses a basic handle to wind the bearing in.
Suitable for occasional home mechanic use (once or twice a year).

🇺🇸

$110.58

🇫🇷

€59.99

🇬🇧

£47.49

Last checked:

4 days

ago

RIDERACE Bicycle Bottom Bracket Tapping Tool Set High Strength Steel BSA BC1.37 * 24T Bike Frame BB Thread Tap Repair Tools

Created: January 13, 2026

The RIDERACE Bicycle Bottom Bracket Tapping Tool Set High Strength Steel BSA BC1.37 * 24T Bike Frame BB Thread Tap Repair Tools is not mentioned in this video.

AI-Summary

🇺🇸

$68.47

🇫🇷

€52.39

🇬🇧

£46.09

Last checked:

4 days

ago

Professional Bicycle Correction Gauge Aluminium Alloy Bike Positioning Center Gauge For Wheel Rim Truing Stand MTB Repair Tool

Created: January 13, 2026

The Professional Bicycle Correction Gauge Aluminium Alloy Bike Positioning Center Gauge For Wheel Rim Truing Stand MTB Repair Tool is not mentioned in this video. The reviewer discusses a different tool: a derailleur hanger alignment gauge, which is used for checking and straightening derailleur hangers. They also briefly mention a separate tool for calibrating a wheel truing stand, but this is not the product named in the query.

AI-Summary

🇫🇷

€11.39

🇬🇧

£8.99

Last checked:

4 days

ago

RRSKIT Professional Bicycle Wheel Truing Stand With Adjustment Rims Dial Indicator And Gauge Set MTB Road Bike Wheel Repair Tool

Created: January 13, 2026

The RRSKIT Professional Bicycle Wheel Truing Stand With Adjustment Rims Dial Indicator And Gauge Set MTB Road Bike Wheel Repair Tool is not mentioned in this video.

AI-Summary

🇺🇸

$111.73

🇫🇷

€122.99

🇬🇧

£100.99

Last checked:

4 days

ago

3-Piece Set of Wire Pliers, Diagonal Nose Pliers, Needle Nose Pliers, Industrial Grade Preferred Pliers, Durable Chromium Vanadium Steel, Suitable for Wire Cutting, Screwdriver, Etc

Created: January 13, 2026

The reviewer mentions a set of pliers as part of a home mechanic's toolkit sourced from AliExpress. They briefly demonstrate the set, which includes long nose pliers, standard pliers, and side cutters, and state that such a set is useful for various tasks in a workshop, like using pliers to remove a valve adapter or side cutters for cable ties. They do not provide a detailed review or specific performance test of this exact 3-piece set.

AI-Summary

Pros

The reviewer states you definitely need a set of pliers for various tasks in a workshop.
They mention the set includes long nose pliers, standard pliers, and side cutters, covering different uses.

Cons

The reviewer notes that when trying to cut a spoke with the side cutters, it was a struggle and 'you're going to break your hand,' indicating they are not suitable for heavy-duty tasks like cutting spokes.

Key Points

The set includes long nose pliers, standard pliers, and side cutters.
Long nose pliers are useful for tasks like removing a valve adapter.
Side cutters are used for cable ties.

🇺🇸

$14.84

🇫🇷

€11.69

🇬🇧

£9.29

Last checked:

4 days

ago

RIDERACE Bicycle Cassette Flywheel Remover Sprocket Extractor Bike Upgrade Rotor Lockring Removal Wrench Chain Whip Repair Tools

Created: January 13, 2026

The RIDERACE Bicycle Cassette Flywheel Remover Sprocket Extractor Bike Upgrade Rotor Lockring Removal Wrench Chain Whip Repair Tools is not mentioned in this video. The reviewer discusses a different, unbranded cassette removal tool and chain whip that came as a set from AliExpress.

AI-Summary

🇺🇸

$17.82

🇫🇷

€6.09

🇬🇧

£5.09

Last checked:

4 days

ago

Bike Internal Cable Routing Kit Tool Quick Traction Guide Magnet for Bicycle Frames Shift Brake Inner Cable Hydraulic Hose

Created: January 13, 2026

The reviewer discusses an internal routing kit tool, which they mention having multiple versions of from different manufacturers. They describe it as a kit containing various gadgets and ends for routing internal cables and hydraulic hoses. They state it is useful for situations where liners were not left in the frame during disassembly or when building a new frame. They note the kits can be fiddly but are effective for getting out of trouble. They also mention that the components from different kits are often compatible, allowing one to build a comprehensive collection.

AI-Summary

Pros

Super cheap
Really really good kit
Will get you out of trouble
Contains loads of different things that screw into or clamp over hoses and stuff

Cons

Can be a bit fiddly

Key Points

The reviewer has about four of these kits from different manufacturers.
Different kits come with different gadgets and ends.
The parts from different kits tend to be fairly compatible.
Useful if you didn't put liner in the frame before removing cables/hoses, or if you bought a bare frame.
The kit is for internal cable and hydraulic hose routing.

🇺🇸

$8.70

🇫🇷

€6.89

🇬🇧

£5.39

Last checked:

4 days

ago

Bike Pedal Wrench 15mm Head Open End Stainless Steel Sturdy Durable MTB Road Bicycle Pedal Spanner Install Remover Repair Tool

Created: January 13, 2026

The reviewer mentions a 'pedal spanner' as part of a collection of AliExpress tools being tested. They state it is basically a 15mm spanner that is thinner on the end to fit behind pedal cages and longer for leverage. They use it to remove a pedal, noting it works without issue. They compare it to their usual Weiha brand tool, noting the main difference is the length, with the Weiha offering more leverage. They conclude the AliExpress version does the job perfectly well.

AI-Summary

Pros

It is thinner on the end to get in behind pedal cages.
It is longer than a standard spanner for more leverage.
It works without any problem for removing pedals.
It does the job perfectly well.

Cons

It is shorter than the reviewer's preferred Weiha brand tool, offering less leverage.

Key Points

It is a pedal spanner.
It is basically a 15mm spanner.
It is designed to be thinner on the end for access.
It is longer than a standard spanner for leverage.
Some pedals also have an Allen key fitting.

🇺🇸

$4.59

🇫🇷

€5.69

🇬🇧

£4.20

Last checked:

4 days

ago

TOOPRE Bicycle Portable Torque Wrench Inner Hexagon Set 10-20NM High Precision Torque Tool Set Bicycles Convenient Torque Wrench

Created: January 13, 2026

The reviewer discusses a basic torque wrench from TOOPRE (referred to as 'two pre' in the transcript). They describe it as a manual tool that provides an indication of torque by flexing a handle, rather than being a highly accurate click-type wrench. They test it on a stem bolt, comparing its indicated 6 Nm setting against a preset Park Tool torque wrench, and find it to be reasonably close. The reviewer positions it as a tool for home mechanics who need a basic guide to prevent overtightening, rather than for precision work.

AI-Summary

Pros

Provides a good indication of torque to prevent overtightening bolts.
Suitable for occasional home mechanic use.
Comes with a selection of bits, including some Torx bits.
The test showed it was reasonably accurate when compared to a preset torque wrench for a stem bolt.

Cons

It is not going to be 100% accurate.
It is described as 'nothing like' a digital or professional click-type torque wrench in terms of precision.

Key Points

It is a manual torque wrench that flexes to indicate torque.
The handle bends, and a scale shows the Newton meter reading.
Tested by torquing a stem bolt to an indicated 6 Nm.
When checked with a Park Tool preset torque wrench, the bolt was at exactly 6 Nm, suggesting the TOOPRE wrench was close.
Intended to give people who don't comprehend torque an indication of how tight bolts should be.

🇺🇸

$9.73

🇫🇷

€7.79

🇬🇧

£5.73

Last checked:

4 days

ago

TOOPRE Bicycle Screwdriver One-Line/Cross-Type Mountain Road Bike High-Strength Anti-Slip Repair Tool

Created: January 13, 2026

The reviewer mentions the TOOPRE screwdriver twice. They first list it as part of the initial tool collection, describing it as a 'cross-head screwdriver'. Later, they discuss screwdrivers in general, noting that they are not used a great deal on modern bikes, but that the TOOPRE one would work for occasional home mechanic use. They compare it to a Park Tool JIS screwdriver they own, which they praise highly.

AI-Summary

Pros

For occasional home mechanic use (once or twice a year), it is stated that 'this is going to work'.

Cons

The reviewer notes that screwdrivers are not used a great deal on modern bikes, implying limited utility.
They also mention that the TOOPRE screwdriver might be 'too big for a lot of stuff', suggesting a need for a smaller size as well.

Key Points

It is a cross-head screwdriver.
It is suitable for occasional home mechanic use.
The reviewer suggests a smaller size might also be needed for some tasks.

🇺🇸

$6.22

🇫🇷

€4.89

🇬🇧

£3.64

Last checked:

4 days

ago

RIDERACE Bicycle Chain Pin Remover Mountian Bike Link Breaker Splitter Repair Tool Road Cycling Chain Extractor Cutter Device

Created: January 13, 2026

The reviewer demonstrates and discusses the RIDERACE chain tool while removing a chain from a Cannondale bike. They describe its features, feel, and performance, concluding it is suitable for occasional home mechanic use.

AI-Summary

Pros

Looks really good quality
Has a super smooth thread
Feels good and substantial
Not the usual cheap rubbish
Comes with a spare pin in the handle
Has an adjustable stop on the end to lock it in place and stop it moving around
Works perfectly well for splitting a chain
Will do the job perfectly well for occasional home mechanic use

Cons

No cons found in the analysis.

Key Points

It is a Rider Ace chain tool
It has an adjustable stop
It comes with a spare pin stored in the handle
The reviewer used it to split a chain during the demonstration
They note that in a workshop, a chain tool is very heavily used, but a home mechanic would use it very rarely

🇺🇸

$14.01

🇫🇷

€6.19

🇬🇧

£4.79

Last checked:

4 days

ago

MUQZI Bike Tool Kit Bottom Bracket Install and Removal Tool Bicycle Bottom Bracket Bearing Remover For BB86/BB30/BB91/BB92/PF30

Created: January 13, 2026

The reviewer discusses a press fit bottom bracket removal and installation kit, which appears to be the tool in question, though the exact brand name 'MUQZI' is not stated. They mention they used it quite a lot in the past but do not use it anymore, having switched to a BSC kit. They describe it as a bit fiddly to assemble initially but confirm it works for pulling bearings out and installing them. They note it includes different sizes and did the job without breaking.

AI-Summary

Pros

It works.
It did the job.
It works really, really well.
It will take bearings out and fit them.
It is not massively expensive (approx. £30).
It did not break.

Cons

It is a bit fiddly to put together because it's not very clear what goes where.
The reviewer no longer uses it, having upgraded to a BSC kit.

Key Points

It is a press fit bottom bracket removal and installation kit.
It pulls bearings out.
It has different sizes included.
It was used quite a lot by the reviewer in the past.
It is suitable for occasional use.

🇺🇸

$42.22

🇫🇷

€28.39

🇬🇧

£23.49

Last checked:

4 days

ago

Bicycle Brake Cable Pip0e Wire Cutter Mountain Bike Transmission Cable Pipe Inner Wire Wire Cutter Cutting Tool

Created: January 13, 2026

The Bicycle Brake Cable Pip0e Wire Cutter Mountain Bike Transmission Cable Pipe Inner Wire Wire Cutter Cutting Tool is not mentioned in this video.

AI-Summary

🇫🇷

€6.99

🇬🇧

£6.42

Last checked:

4 days

ago

TOOPRE Bicycle Derailleur Hanger Alignment Gauge Professional Tool Measure Straighten Dropout Repair DAG-2.2 MTB Road Bike Tools

Created: January 13, 2026

The reviewer discusses a derailleur hanger alignment gauge, which is a TOOPRE tool, multiple times throughout the video. They state they have used it almost daily for nearly four years and find it fantastic. They demonstrate its use by showing how to check and straighten a derailleur hanger, explaining the principle of using an elastic band to compare alignment at the top and bottom of the wheel. They mention it is exactly the same as any other derailleur hanger alignment gauge and is suitable for both aluminum and other materials, with a caution about aluminum work-hardening after one straightening.

AI-Summary

Pros

Fantastic tool.
Used almost daily for nearly four years.
Works exactly the same as any other derailleur hanger alignment gauge.
Suitable for home mechanics who need one.

Cons

Aluminum hangers can work-harden and may snap if straightened repeatedly; the tool is for minor tweaks, not major bends.

Key Points

Used for checking and straightening derailleur hangers.
Operation involves spinning it to the top of the wheel, setting an elastic band, and swinging it down to compare alignment with the wheel.
Can be used to leverage and straighten hangers.
Aluminum hangers can typically be straightened once, but may snap if bent again due to work hardening.
The tool provides three points of contact for alignment.