AERORAPTOR ULTRA 23L 3.5mm Carbon Spoke Road Wheel 23mm Inter 54T Ratchet Disc 20h TPI Ceramic Bearings Bicycle Wheelset 1140g

Ich hab für meine Freundin die Tagoola/AeroRaptor AR 50mm Laufräder mit 3.5mm Carbon Speichen bestellt. Erster Eindruck sehr positiv. 1180g ohne Felgenband, 23.5mm IW, DT Swiss Ratchet Klon. Freundin meinte spürbare Verbesserung gegenüber den DT ARC1400. Lieferzeit ca. 1 Monat, umgerechnet etwa 485€. Muss morgen mal nach dem Putzen Fotos machen.

wheels are very beutifull. the quallity is in top level. i install conti 5000. very difficult to put them . never install them straight from the box. rear wheel is so so loud . .. weight only 1180gr in 50mm

Today I received a custom order I made 8th of october. Order was these wheels but with a 60 rear and 50 front. 2 Mistakes inside the order, 1 major which is they forgot the ratchet inside the freewheel body, second is minor but kind of annoying, the tubeless valves are both the same length and for the 60mm rear only a little bit of the valve is showing. Talked about it with Matter, he told me he was going to ship a new ratchet for me and it would take approximatly 1 week to get to me. Asked him if I could get one locally to speed up process, originally said yes and when I confirmed with him with the quote a local bike shop told me he then said it was too expensive, which I part of agree when you compare with price of ratchet on aliexpress (it was 75 euros for a 36T one). Then he told me he was reaching out of a connection he had in my country (france) to try to figure it all out as quick as possible. This is still where we are now. I expect to have an answer tomorrow morning. Otherwise quality seems good, packaging was ok but not the best. Will keep you updated once I know more

Sharing my recent experience with Tagoola, ordered two wheelsets from them through AliExpress:

Aeroraptor RP PRO, 23.5mm internal, 31mm external, 45mm deep
https://aliexpress.com/item/1005009041517854.html
Opted for the steel bearings, weight is 1177g (with rim tape) vs the 1160g advertised without tape
Wheels are mounted on a BMC Roadmachine and shaved off almost 400g over my previous 50mm carbon wheel with steel spokes (Scribe Aero, 4 years old).
Same as above: requested no decals and spare spokes (2 shipped), rim bed with holes and covered with Kapton like tape.
This is my first carbon spoke wheelset (spoke width 3.5mm), I would not say it is a harsh ride feel, but it feels less compliant as steel spokes.
On the other hand, because of less weight and the stiff spokes, the wheels feel more stiff when accelerating and more lively when riding and cornering compared to my previous wheelset.
After vouchers and with seller's shipping method (including delivery & tax to Europe, Germany) these were <600 EUR.

Can not speak much about crosswind performance or long term relaibility, only done a few rides on each of the wheels.
Communication with Matter and the team was excellent and prompt.
Hard to believe there are better wheels, most definitely not at this price point - clear recommendation from my side.