Only one independent voice (maweb_) has covered this chainring, and only briefly across a three-part build series, so there is no real consensus. He found it visually appealing, correctly matched to a 110 BCD four-bolt power-meter crank, and solid under a ~1000 W sprint, but installation was not entirely trivial and no instructions were included. Durability remains unconfirmed because no long-term test was done.
Pros
- Feels very solid under load, with no flex or deformation noticed during a ~1000 W sprint1
- Correct 110 BCD four-bolt fit for the power meter crank1
- 50/34 gearing gives enough range for climbs and speed on the flats1
- Mounting is relatively simple: crank through, lockring on and torqued1
- Looks quite nice aesthetically1
Cons
Key Facts
- 110 BCD, four-bolt mounting pattern1
- 2x setup with 50-tooth outer and 34-tooth inner chainring1
- Crank spindle passes through the chainring and is secured with a lockring tightened to about 40 Nm1
- Chosen to pair with a Geoid PM500 power meter crankset (170 mm crank length)1
- Instructions were supplied for the power meter but not for the chainring1
- Survived roughly 1000 W during a sprint with no observed deformation, though this was not a long-term test1
Sources
Reviews & Ratings
37:12The reviewer does not explicitly name the GOLDIX 110BCD 2x Chainring in the transcript. He discusses mounting chainrings onto a power meter crank, noting that installing the chainring was not entirely trivial. He received instructions for the power meter but no instructions for the chainring, and he is unsure whether the second chainring should be mounted in its current orientation or rotated. He states the mounting process is relatively simple: the crank passes through and a lockring is installed, which must be tightened to approximately 40 Newtonmeters.
18:03The reviewer briefly addresses the GOLDIX 110BCD 2x chainring in response to a viewer comment from Part 1 who worried that the chainring might flex or deform. He notes he has not done a long-term test, but so far everything feels very solid, even when he pushed nearly 1000 watts through the pedals during a fast sprint. He does not report any deformation or flex issues with the chainring.
16:48The reviewer chose the GOLDIX 110BCD 2x chainring for his road bike build because it fits the 110 BCD four-bolt mounting standard of his Geoid PM500 power meter crankset and he thinks it looks quite nice. He notes it has a large 50-tooth chainring and a small 34-tooth chainring, giving him enough range for climbing and plenty of power on flat terrain.
Where to Buy

GOLDIX 110BCD 2X Doppelkettenblatt 9-12S Rennrad Kettenblatt 7075 Aluminiumlegierung 4 Schrauben Kettenblatt für SHIMANO 105 R7000 R8000 - AliExpress 18

Questions about GOLDIX 110BCD 2x Chainring
Sign up and share your experience — help other riders decide!
Create Account & Review
