MyBike.parts
Reviews & Ratings
I Bought a Bootleg S-WORKS Saddle from Ali Express
The reviewer compares a $68 bootleg 3D printed saddle to a $450 original, noting their similarities and differences. They mention that the bootleg is slightly lighter (197g vs 202g) and looks very similar to the original, with carbon bottoms and rails. However, the bootleg lacks the density changes and specialized body geometry of the original, making it uniformly firm. Despite this, the reviewer is pleasantly surprised by the bootleg's comfort and states they would keep it in rotation, though the original is slightly more comfortable due to its research and technology.
AI-Summary
Pros
- Lighter than the original (197g vs 202g)
- Looks very similar to the original
- Has carbon bottoms and rails
- Surprisingly comfortable
- Good value for the price ($68 vs $450)
- The reviewer would keep it in rotation
Cons
- Lacks density changes found in the original
- Uniformly firm throughout
- Middle and cutout are harder than the original
- Rails are 7x9, not round, limiting compatibility with some seat posts
- No branding (missing the 's' on the back)
Key Points
- Weight: 197g (bootleg) vs 202g (original)
- Carbon bottoms and rails
- 7x9 rails (not round)
- Uniform firmness (no density changes)
- Missing branding ('s' on the back)
This Cheap Ali Express Saddle Surprised Me
The reviewer discusses their experience with a 3D printed saddle purchased from AliExpress for $68. They highlight its comfort, lightweight design, and value for money. The saddle features a carbon shell, 7x9 carbon rails, and a honeycomb pattern for pressure relief. The reviewer compares it favorably to more expensive options like the S Works Mirror saddle, noting its similar comfort at a fraction of the price. They mention setting it up was easy, though tightening the bolt was slightly tricky due to the honeycomb design. The reviewer plans to purchase more of these saddles for other bikes.
AI-Summary
Pros
- Very comfortable
- Lightweight (under 200g)
- Affordable ($68)
- Carbon shell and 7x9 carbon rails
- Honeycomb pattern for pressure relief
- Easy to set up
- Good balance of firmness and comfort
- Comparable to more expensive saddles
Cons
- Tightening the bolt was slightly difficult due to the honeycomb design
- Firmness is consistent throughout, not variable like some high-end saddles
Key Points
- 143 mm width
- 245 mm length
- Under 200g weight
- Carbon shell and 7x9 carbon rails
- Honeycomb pattern for pressure relief
- Consistent firmness throughout
Where to Buy
- Last check of link:
- about 4 hours
| Ship-To | Cost |
|---|---|
| πΊπΈ | $114.40 |
- Aliexpress Rating:
- 4.6 (178 Reviews)
- Last check of link:
- 9 months
| Ship-To | Cost |
|---|---|
| πΊπΈ | $67.10 |
| π«π· | β¬70.39 |
| π¬π§ | Β£61.39 |