The Winspace HYPER 2 Riser Handlebar is an integrated carbon handlebar with a positive 11° angle and 40mm rise, praised for its comfort, aerodynamic benefits, and build quality. Installation can be challenging due to internal cable routing, and some fit-and-finish issues exist, but it offers a unique riding position that blends comfort and performance. It is compatible with 1-1/8 inch steerer tubes and most major frames, though not 1-1/4 inch.
Pros
- Provides up to 4 cm of rise, allowing a more upright and comfortable riding position without excessive spacers1
- Positive 11° angle provides a more natural and comfortable riding position, maximizing pedal push2
- Very comfortable, especially the high grip, with quick transition between high and low grips2
- Transmits a lot of rigidity to the bike and provides a greater sense of control2
- Improves aerodynamics by allowing forearms to be more parallel to the ground1
- Attention to detail and build quality is excellent, comparable to top Western brands2
- Garmin bracket mounts flush with the handlebar, maintaining aerodynamics2
- Compatible with all Winspace frames and most major brand frames; also suitable for gravel and endurance bikes21
- Easy to install, took about 20 minutes (without internal cable routing complexity)2
Cons
- Installation is difficult due to internal cable routing; took about 40 minutes to route hoses and required cutting and re-bleeding hydraulic brakes1
- The top cover does not fit perfectly, leaving a slight mismatch with the stem; a standard round spacer does not sit flush, causing a gap1
- The rear of the handlebar is slightly sharp and can dig into the palm when riding without gloves1
- Only available for 1-1/8 inch steerer tubes, limiting compatibility with 1-1/4 inch bikes1
- The included compression plug is all aluminum and can strip if over-tightened; requires grease1
- The price is high at $499, especially for a Chinese product1
- Positive angle and stack may not suit everyone; needs consideration of personal needs and biomechanist advice2
Key Facts
- Weight: 369 g (with 95 mm stem); compression plug 41 g, top cover 21 g, head unit mount 30 g; claimed 320 g for 400mm size with screws12
- Price: $499 list, around €400 with discount code21
- Material: Toray T800 and T1000 carbon fiber21
- Geometry: 11° positive angle, 40 mm rise, 73 mm reach, 123 mm drop, 4-6° flare21
- Stem length options: 95, 105, 115, 125, 135 mm; handlebar widths: 380, 400, 420 mm21
- Steerer tube compatibility: 1-1/8 inch only; not compatible with 1-1/4 inch1
- Torque spec for stem bolts: 6-8 Nm1
- Includes accessories: spacers, Garmin bracket, light mount, compression plug, top cover21
Reviews & Ratings
42:13The reviewer installs and tests the Winspace HYPER 2 Riser Handlebar on a Yoeleo R12 road bike. He highlights that the handlebar provides up to 4 cm of rise, which helps achieve a more upright and comfortable riding position without excessive spacers. The installation is complex due to internal cable routing, requiring cutting and re-bleeding hydraulic brake hoses. He praises the comfort, aerodynamic benefits, and the new hand position it offers, but notes several issues: the top cover does not fit perfectly, a standard round spacer does not sit flush on the stem, the rear of the bar is slightly sharp, and the price is high at $499. He also suggests that Winspace should offer a 1-1/4 inch steerer version to fit more bikes. Overall, he recommends the handlebar for riders seeking a more relaxed and efficient position.
19:43The reviewer introduces the Winspace HYPER 2 Riser Handlebar as a new integrated handlebar with a positive 11° angle, similar to the Colnago Y1RS. He praises its build quality, aerodynamic design, and comfort, noting it is suitable for many cyclists. He details its specifications, compatibility, and price, and highly recommends it.
14:22The reviewer installs the Winspace HYPER 2 Riser Handlebar on his Winspace T1006, replacing a standard race handlebar. He finds the installation simple, taking about 20 minutes, and notes that the handlebar offers a very comfortable position, especially on the high grip, with a quick transition between high and low grips. He appreciates the increased control and rigidity, and considers it a successful upgrade that makes the bike both more comfortable and more race-oriented. He mentions a price of 490 USD and a discount code.
Use code MyBikeParts5 (5% off) when ordering from Winspace
MyBikeParts5 (5% off)ANDREA10Where to Buy
Winspace HYPER 2 Riser Handlebar
Winspace HYPER 2 Riser Handlebar
Specifications
Attributes
Spotted an error in the specs? Help us correct it — sign in or create an account.
Questions about Winspace HYPER 2 Riser Handlebar
Sign up and share your experience — help other riders decide!
Create Account & Review