MyBike.parts
Reviews & Ratings
The reviewer discusses their experience with the HYGGE Model S carbon frame, which they purchased from AliExpress and built up from scratch. They highlight the frame's aerodynamic design, integrated handlebar, and fully internal cable routing. The reviewer mentions riding the bike for about 300 km in various conditions, including commuting and gravel riding. They note the frame's lightweight nature, chameleon paint, and carbon fiber weave visible near the bottom bracket. The reviewer also discusses some challenges during the build process, such as sharp edges inside the frame and handlebar, and the lack of grommets for cable entry and exits.
AI-Summary
Pros
- Looks sexy with a great chameleon paint job
- Feels fast and lightweight (17.36 kg for the full bike build)
- Integrated aerodynamic handlebar and fully internal routed frame for a clean look
- Can fit up to 30mm tires, potentially suitable for gravel riding
- Good value for the price compared to brand-name frames
- Visible carbon fiber weave near the bottom bracket area
- Stable and planted feel during rides, even at high speeds (60 km/h descent)
Cons
- Sharp edges on the handlebar where cable housing enters/exits
- Sharp edges inside the frame near the bottom bracket area
- Lack of grommets for cable entry and exits, risking dirt and water ingress
- Plastic spacers in the headset assembly may not compress as well as carbon
- Seat post seems thin, with reports of others cracking their frame in this area
- Potential for cable housing wear due to sharp edges
Key Points
- Aerodynamic carbon frame with integrated handlebar
- Fully internal cable routing
- Disc brake compatible
- Chameleon paint finish
- Visible carbon fiber weave near bottom bracket
- Weighs approximately 17.36 kg for full build
- Fits up to 30mm tires
- Integrated headset assembly with plastic spacers
- Requires careful assembly due to sharp edges
The reviewer discusses the HYGGE Model S carbon frame as part of their AliExpress bike build. They mention purchasing it from the HYGGE official store on AliExpress, with a size of 52 CM (medium frame). The frame, along with the fork, handlebar, headset assembly, and seat post, cost about $878 Canadian. The reviewer highlights that the frame is part of a cost-effective build, comparing favorably to big brands. They express pride in the build's performance, noting it could keep up with top-tier bikes, though they primarily use it for daily commuting and light training.
AI-Summary
Pros
- Cost-effective compared to big brands
- Part of a build that performs comparably to top-tier bikes
- Purchased from the official HYGGE store on AliExpress
Cons
- No cons found in the analysis.
Key Points
- Size 52 CM (medium frame)
- Includes frame, fork, handlebar, headset assembly, and seat post
- Cost about $878 Canadian
- Part of a sub-$2,000 USD bike build including power meter pedals
The UPGRADED EPS molding version! HYGGE Aerodynamic carbon frame MODEL S CARBON FRAME, ROAD FRAME, DISC BRAKE BIKE is not mentioned in this video.
AI-Summary
The reviewer discusses their experience with the UPGRADED EPS molding version of the HYGGE Aerodynamic carbon frame MODEL S CARBON FRAME, ROAD FRAME, DISC BRAKE BIKE. They received a replacement frame after breaking the seat stay on their previous bike. The reviewer highlights that the EPS molded frame has smoother internal construction, making it easier to route cables internally due to fewer sharp edges. They note that the frame weighs 999 grams for the medium size and appreciate the clean inner surfaces. The reviewer mentions that the ride feel is not noticeably different from the previous version but values the ease of cable routing. They also discuss the headset assembly and other components, noting some minor issues like creaking and the need for additional grease or carbon paste.
AI-Summary
Pros
- Smoother internal construction
- Easier to route cables internally due to fewer sharp edges
- Clean inner surfaces
- Lightweight (999 grams for medium size)
- Solid build quality
- Unique off-brand frame
- Good value for money
Cons
- Bottom bracket surface looks a bit machined up
- Some creaking issues with the seat post
- Squeaky brakes
- Price increase compared to previous version
- Water might enter through grommet holes
Key Points
- EPS molded frame has smoother internal construction
- Easier cable routing due to fewer sharp edges
- Frame weighs 999 grams for medium size
- Headset assembly provided by HYGGE
- Some minor issues with creaking and brake noise
- Price is about $150 more than the previous version
The reviewer discusses the HYGGE Aerodynamic carbon frame MODEL S CARBON FRAME as part of their budget bike build. They highlight that it is a full carbon frame, lightweight, and aerodynamic, made with EPS molding for a smooth finish and strong strength-to-weight ratio. The frame comes with an integrated handlebar, fork, and seat post, all purchased from AliExpress for a total cost of β¬668. The reviewer mentions the frame size is small, paired with a 90 mm stem and 400 mm wide integrated handlebar.
AI-Summary
Pros
- Full carbon construction
- Lightweight
- Aerodynamic design
- EPS molding for smooth finish
- Strong strength-to-weight ratio
- Includes integrated handlebar, fork, and seat post
- Budget-friendly at β¬668 for the set
Cons
- No specific negative points mentioned about the frame itself
- Potential concerns about limited customer support or warranty due to being purchased from AliExpress (mentioned generally for budget parts)
Key Points
- Full carbon frame
- Lightweight and aerodynamic
- EPS molding technology
- Small frame size
- 90 mm stem and 400 mm wide integrated handlebar
- Total cost of β¬668 for frame, handlebar, fork, and seat post
- Purchased from AliExpress
The reviewer mentions building a road bike using the Higge Model S frame at the beginning of the video. They note that the frame is full carbon and take precautions when handling it, such as not applying too much pressure on the bike repair stand and using carbon paste on the seat post to prevent slipping. The frame features a BSA bottom bracket, which they found easy to install due to its threaded design. The reviewer does not provide extensive details about the frame's performance or aerodynamics but focuses more on the building process.
AI-Summary
Pros
- Full carbon construction
- BSA bottom bracket makes installation easy
Cons
- No cons found in the analysis.
Key Points
- Full carbon frame
- Requires careful handling due to carbon construction
- Uses carbon paste on seat post to prevent slipping
- Features a BSA bottom bracket
The HYGGE Aerodynamic carbon frame MODEL S is a budget-friendly Chinese carbon frameset, typically priced around $550-600 USD with shipping. It includes a frame, fork, integrated handlebar, and seatpost. The frame is made of carbon fiber, with newer EPS-molded versions offering smoother internal surfaces. Typical frame weight is around 963-1060g (size dependent), fork 349-386g, seatpost 133-200g, and handlebar 328-350g. It uses a BSA threaded bottom bracket, flat mount disc brakes, and has a proprietary seatpost design. The frame is generally described as stiff with good power transfer, though some note flex in the fork and rear triangle. Tire clearance is limited, with 28mm tires often measuring 30-32mm, and 32mm being the absolute maximum, especially in the front. Common issues include headset play, seatpost slipping (improved with newer clamps), and quality control inconsistencies like paint defects, rough internal edges, and subpar hardware. Customer service and warranty support are mixed, with some reporting difficulties in getting issues resolved.
AI-Generated Forum Summary
Pros
- Excellent value for money, offering a complete carbon frameset with handlebar and seatpost for around $550-600 USD
- Frame is stiff with good power transfer and responsive handling, suitable for racing and fast riding
- Paint quality and appearance are generally praised, with attractive color options and laser decals
Cons
- Common headset play issues due to poorly fitting compression rings (C-rings) and spacer alignment problems
- Seatpost slipping occurs for some riders, though newer clamp designs and higher torque (6Nm) with carbon paste help
- Quality control inconsistencies: paint defects (microblistering), rough internal edges, subpar hardware (soft bolts, rusting), and poor customer service/warranty support
Key Points
- BSA threaded bottom bracket
- Flat mount disc brakes (160mm front, 140/160mm rear possible with adapters)
- Proprietary seatpost design (no zero-offset option available)
- Integrated handlebar (various widths/stem lengths)
- Tire clearance: 28mm nominal (measures ~30-32mm), 32mm absolute max, especially tight in front fork
- EPS-molded version (2024+) has smoother internals
- Headset issues often require aftermarket compression rings or shims to fix play
- Delivery to EU often tax/duty free with seller shipping (e.g., DPD)
Frequently Asked Questions
What is the maximum tire width that fits the HYGGE Model S frame?
The frame officially supports 28mm tires, but these often measure 30-32mm on wider rims. 32mm tires (actual measured width) are the absolute maximum, especially in the front fork where clearance is very tight. Some users run 28mm front/30mm rear for safety.
How do I fix headset play on the HYGGE Model S?
Headset play is a common issue. Solutions include: using aftermarket compression rings (e.g., Specialized-style ring), adding micro-spacers (0.3-0.5mm) above the C-ring, applying aluminum tape to the C-ring, ensuring proper torque (4-6Nm on top cap, 5-6Nm on stem bolts), using carbon paste, and checking bearing seating. Newer frames may include updated C-rings.
Does the seatpost slip, and how can I prevent it?
Some riders experience seatpost slipping. Prevention methods include: using the updated seatpost clamp (horizontal striations), applying carbon grip paste generously, torquing the clamp to 5-6Nm (official spec), and ensuring the clamp contacts the anti-slip coating on the seatpost. Newer clamp designs have improved this issue.
What is the delivery time and are there import taxes to the EU?
Delivery times vary but are often 2-4 weeks to the EU. When selecting the seller's shipping method (e.g., DPD), the price typically includes all taxes and duties, so no additional charges upon delivery in the EU. Shipping to other regions may differ.
Can I use a 160mm rotor in the rear?
Yes, a 160mm rotor can be used in the rear, but it may require a flat-mount adapter (e.g., Shimano SM-MA-R160-D). Some calipers may fit directly, while others need the adapter. Clearance can be tight, especially on smaller frame sizes.
Where to Buy
