The RYET 3D printed saddle is widely praised as an exceptionally comfortable, lightweight, and durable option that offers performance comparable to high-end brands at a fraction of the cost.
Pros
- Extremely lightweight
- Excellent comfort for long rides
- Very affordable (typically $30-$90)
- Durable 3D printed material shows no degradation over thousands of miles
Cons
- 3D printed top material is flexier than some prefer
- Softness is uniform rather than zoned for targeted support
- Nose width may be too wide for some riders
- Carbon rails require specific saddle clamps
Key Facts
- Weighs 165 grams
- 3D printed TPU or rubber upper with honeycomb construction
- Full carbon fiber base with carbon rails (7x9 size)
Reviews & Ratings
The RYET 3D Printed Bicycle Saddle Ultralight Carbon Fiber Hollow Comfortable Breathable MTB Gravel Road bike Cycling Seat Parts is not mentioned in this video.
AI Summary
The reviewer provides a detailed analysis of the Riot 3D printed honeycomb saddle, which they have used extensively. They state it is one of the more high-end saddles on AliExpress. They praise its build quality, highlighting the 3D printed TPU honeycomb top material, which has remained in perfect condition for almost two years. The bottom plate and rails are described as fully carbon, very properly bonded, and extremely stiff with no flex. It features markings on the rails for precise adjustment. The reviewer notes it is a bit heavier than other reviewed saddles at 146g, and that its price has increased to around $59, placing it in the premium AliExpress segment. They conclude it is 'the best of the best' among the options reviewed.
AI Summary
Pros
- High-end build quality.
- Top material is 3D printed TPU honeycomb, which is very nice and sturdy.
- The top material has remained in perfect condition after almost two years of use.
more pros in the video
Cons
- Heavier than other reviewed saddles (146g).
- Price has increased significantly; now around $59, which is considered the premium segment of AliExpress.
- Not as cheap as typical AliExpress price expectations.
Key Points
- Brand/Model: Riot 3D printed honeycomb saddle.
- Top Material: 3D printed TPU honeycomb.
- Frame/Rails: Fully carbon bottom plate and carbon rails.
more key points in the video
The reviewer discusses the RYET 3D Printed Bicycle Saddle, noting it is a recent release from the brand RYET (also referred to as 'Riot' in the transcript). They state it is very similar to a more expensive saddle they previously recommended, featuring a carbon base and a 3D printed rubber cushion. They have used it extensively over the year.
AI Summary
Pros
- Lightweight
- Comfortable
- Excellent value for money (cost less than half the price of a similar saddle)
more pros in the video
Key Points
- Brand is RYET (also referred to as 'Riot')
- Carbon base including carbon saddle rails
- Top cushion is 3D printed rubber
more key points in the video
The reviewer discusses their experience with the RYET 3D Printed Bicycle Saddle, highlighting its durability, comfort, and performance over extensive use.
AI Summary
Pros
- Comfortable and lightweight
- Grippy top keeps the rider in place
- Seriously robust and durable
more pros in the video
Key Points
- 3D printed carbon fiber construction
- Used for over 3,000 miles without issues
- Initially cost £70, now available for £30-50
The reviewer briefly mentions the RYET 3D Printed Bicycle Saddle Ultralight Carbon Fiber Hollow Comfortable Breathable MTB Gravel Road bike Cycling Seat Parts but does not provide detailed analysis.
AI Summary
The reviewer states they are positively surprised by the RYET 3D Carbon saddle's comfort after initial testing. They praise its construction, light weight, and consider it a great upgrade for their road bike.
AI Summary
Pros
- Very comfortable
- Very well made
- Excellent looks
more pros in the video
Cons
- Not yet a long-term test, only initial feedback
Key Points
- Weighs 160g
- 15 cm wide
- Inner hole is 13 cm in diameter
more key points in the video
The reviewer tested the RYET 3D printed carbon bike saddle for about one and a half to two months. They state it is very comfortable, more so than their stock Trek saddle, and relatively lightweight.
AI Summary
Pros
- Very comfortable
- More comfortable than the reviewer's stock Trek Domane SL5 saddle
- Comfortable even when riding on aero bars for 3+ hours with no discomfort
more pros in the video
Cons
- The saddle is on the harder side
- Poor customer service from the official RYET AliExpress store
- The comfort upgrade over a decent stock saddle was only slight
Key Points
- Carbon version weighs 165-185g
- Plastic version is about 70g heavier
- Purchased for $51.74, but can be found for under $40
more key points in the video
The reviewer states they purchased the RYET 3D printed saddle several months ago and have used it extensively, finding it very comfortable. They note it was a significant improvement over the stock saddle on their Trek bike.
AI Summary
Pros
- Very comfortable
- Significant improvement over stock saddle on Trek Domane SL5
Cons
- Poor customer service experience when asking for product recommendation
Key Points
- 3D printed construction
- Purchased in May
- Used for several months and 4,000-6,000 kilometers
more key points in the video
The reviewer states that if they wanted to upgrade the saddle on their bike, they would choose the RYET 3D printed carbon bike saddle. They note it is very well-reviewed online and that they purchased theirs for a specific price.
AI Summary
Pros
- Very well-reviewed on platforms like YouTube, Reddit, and AliExpress
- People are 'raving about this particular saddle'
- Can be purchased for as little as $30 to $40
Key Points
- 3D printed carbon construction
- Purchased price was $51.74
- Market price range is $30-$40
The reviewer discusses the RYET (spelled 'Riot' in the transcript) brand of saddles, specifically the Riot Ultimate and Riot Air Code models. They are described as cheap, high-quality, 3D printed TPU saddles available on AliExpress. The reviewer uses them in their clinic and states they are as good as, or better than, top-of-the-range specialized saddles. The Riot Air Code is noted for its similarity in shape to a Shimano Pro Stealth, but with superior 3D printed TPU material that is perfectly modulated for comfort and robustness. The Riot Ultimate is highlighted as a narrower option for riders with a narrow pelvis. Both are praised for their comfort, build quality, and value.
AI Summary
Pros
- Really cheap (around $80-$90)
- Really good quality
- As good as top-of-the-range specialized saddles
more pros in the video
Key Points
- Brand is RYET (referred to as 'Riot')
- Available on AliExpress
- Models discussed: Riot Ultimate and Riot Air Code
more key points in the video
The reviewer discusses their experience with the RYET 3D Printed Bicycle Saddle, highlighting its affordability, lightweight design, and comfort. They compare it to higher-end models and note its performance over 1500 km of use.
AI Summary
Pros
- Affordable (around 50-65 Australian dollars)
- Lightweight (165 grams)
- Comfortable for long rides
more pros in the video
Cons
- 3D printed top material is quite flexy, reviewer prefers it stiffer
- Top could be smoother, more like a traditional saddle
Key Points
- Weighs 165 grams
- Carbon shell with 3D printed top
- Used for 1500 km without issues
more key points in the video
The reviewer discusses the RYET 3D Printed Bicycle Saddle, highlighting its affordability and performance. They note its 3D printed upper with honeycomb construction, full carbon fiber base, and carbon rails, which contribute to its lightweight and smart appearance. The reviewer is impressed with its comfort and performance, comparing it favorably to more expensive saddles.
AI Summary
Pros
- Affordable price (£38)
- 3D printed upper with honeycomb construction
- Full carbon fiber base with carbon rails
more pros in the video
Cons
- Softness is uniform across the entire saddle, lacking zoned support
- Nose is slightly wider than preferred by the reviewer
- Carbon rails require a specific saddle clamp
Key Points
- 3D printed upper with honeycomb construction
- Full carbon fiber base
- Carbon rails
more key points in the video
I've had the RYET Air Code with the carbon base for 8 months now, for me it's the most comfortable saddle I've ever had. I love it. after 8 months it is a bit dusty inside the holes, I need to give it a spray or something.
I have the Ryet Aircode 3D printed saddle, full carbone one, and I kind of like it. I would like to try some 155 mm wide 3D printed saddle. Any advices?
Where to Buy
RYET 3D-gedruckter Fahrradsattel, ultraleichte Kohlefaser, hohl, bequem, atmungsaktiv, MTB, Kies, Rennrad, Radfahren, Sitzteile - AliExpress 18
RYET 3D Printed Bicycle Saddle Ultralight Carbon Fiber Hollow Comfortable Breathable MTB Gravel Road bike Cycling Seat Parts
RYET 3D Printed Bike Saddle Ultralight Carbon Fiber Hollow Comfortable Breathable MTB Gravel Road Bicycle Cycling Seating Parts
RYET 3D Gedruckt Bike Sattel Carbon Faser Ultraleicht Hohl Komfortable Atmungs MTB Mountain Road Fahrrad Radfahren Sitz - AliExpress 18
RYET 3D Printed Bicycle Saddle Ultralight Carbon Fiber Hollow Comfortable Breathable MTB Gravel Road bike Cycling Seat Parts
Ryet Voll carbon Sattel 3d gedruckt Fahrrads attel ultraleichte hohle bequeme atmungsaktive MTB/StraÃe 150mm Fahrrad Fahrrads itz Teil - AliExpress 18
Used in Builds
Jeffrey's Ceccotti RF 25
Jeffrey's Gravel Ceccotti RF 25 with Shimano 105 R7000, ELITEWHEELS ENT-D, Continental GP5000, Carbon Crankset & 3D-P...
8,032.0g
€1,319.00
Questions about RYET Aircode
Sign up and share your experience — help other riders decide!
Create Account & Review