All Reviews

Ich (172cm, 82cm SL, 71kg) hatte mir die Ykywbike Bib bestellt. Qualität gut, nicht schlechter als meine wesentlich teureren Bibs, das Polster ist super. Insgesamt sehr komfortabel. Aber: Viel zu kurze Beinlänge. Etwa 5cm zu kurz. Dadurch für mich leider nichts. Ich fahre die in Zukunft unter einer ungepolsterten langen Bib im Winter. Auf die Beinlänge habe ich dummerweise nicht geachtet beim Kauf. Ich probiere eine andere Ykywbike Hose aus.

Die Brillen sind bei mir Verschleißmaterial, ich schmeiße die immer mal runter und eine anständige Brille landet natürlich immer auf dem Glas. Eine der beiden hat den optischen Clip schon drin auf dem Foto. Den hab ich letztes Frühjahr gewagt und das war mit eine der besten Entscheidungen für meine Augen. Ich habe ziemlich einfache optische Werte und kenne dazu meine Pupillendistanz. Ob das jetzt bei komplizierten Korrekturwerten auch hinhaut, kann ich natürlich nicht sagen.

I just bought and installed a Ryet OSPW. The quality Looks good but I experiance chainrub when I am in the gear 53/30 or 36/30 (with 11-30 cassette). as soon as I get one cog lower the rubbing gets less and disappears when I am on the 3rd/4th cog (from the top).

I have the same problem, they rub so hard that I punctured the bibs (too bad they were the best I had ahaha) I then solved it with this saddle which despite a fall holds up very well

Recently tried three different cheap AliX Saddles for my "somewhat modern progressive forward fit" bike. Each about 40 Euros. Two 3D Printed Selle-SMP Copies: Elita One - 255x140mm-3DEX Really liked both SMP copies a lot! About as comfy as my old original Selle SMP. But not quite as ugly and way lighter. Ended up keeping the Goldix version as it has a bit wider front an nicer middle channel. Recommend both!

Recently tried three different cheap AliX Saddles for my "somewhat modern progressive forward fit" bike. Each about 40 Euros. Two 3D Printed Selle-SMP Copies: GOLDIX PS-GLAXY 3D Really liked both SMP copies a lot! About as comfy as my old original Selle SMP. But not quite as ugly and way lighter. Ended up keeping the Goldix version as it has a bit wider front an nicer middle channel. Recommend both!

I recently tried three different cheap AliX Saddles for my 'somewhat modern progressive forward fit' bike. Each about 40 Euros. One of them might be right for you... And the BALUGOE TT (non carbon version). Dont know which saddle this is a clone of. The TT-Saddle copy was very weird at first and is very short!. After tilting it quite a bit and pushing it very far forward it was pretty good in a aero position, but not nearly as nice in any other position. So I would rather go for the SMP Copies which allowed me to roll and open my hips way better.

I recently tried three different cheap AliX Saddles for my 'somewhat modern progressive forward fit' bike. Each about 40 Euros. One of them might be right for you... Two 3D Printed Selle-SMP Copies: Elita One - 255x140mm-3DEX and GOLDIX PS-GLAXY 3D. I really liked both SMP copies a lot. About as comfy as my old original Selle SMP. But not quite as ugly and way lighter. Ended up keeping the Goldix version as it has a bit wider front an nicer middle channel. Recommend both!

I recently tried three different cheap AliX Saddles for my 'somewhat modern progressive forward fit' bike. Each about 40 Euros. One of them might be right for you... Two 3D Printed Selle-SMP Copies: Elita One - 255x140mm-3DEX and GOLDIX PS-GLAXY 3D. I really liked both SMP copies a lot. About as comfy as my old original Selle SMP. But not quite as ugly and way lighter. Ended up keeping the Goldix version as it has a bit wider front an nicer middle channel. Recommend both!

I have this in two bikes. It's the best saddle I've ever had. One has 6500km, and the second one has 2500km. After 6500 material is not perfect, its in my winter bike so maybe this was the issue. But with this price, I can replace it without pain.

I've used these for 4 years now, look very similar. Do a solid job, no problems so far.

I use these for last three seasons and they are flawless

Mein bester "kleiner" Fund sind Langfinger Handschuhe von Inbike aus einem leichten Thermostoff. Ich kann die erst ab etwa 15-17 Grad einsetzen, das liegt aber zu 100% an mir. In der Innenhand ist ein ganz leichtes Polster, nicht klobig, nicht dick. Zur Größe: Ich habe S bestellt. Ich habe sonst so etwa 7,5 manchmal auch 7. Die Handschuhe sind schmal und mit langen Fingern geschnitten. Laut Tabelle hätte S eher zu groß sein müssen. oliv blau und purple sind mittlerweile hier. Wenn ich mal gute Handschuhe zu einem guten Kurs finde, kaufe ich gern gleich mehrere.

Came across a small brand named Megacarbon, who had some nice G3 / 2:1-laced Campagnolo-style laced wheels. Went and got the premium offering of theirs for a total of 525 dollars delivered, not caught in customs. Build quality is class, it's got a Ratchet style hub, and they came readily taped with DT swiss brand tape. Weight around 1320g. Really impressive stuff. They have a cheaper version as well that you can get in for less than 400 dollars here: Also came across the very fake-sounding "Qora", not Bora, in a similar style here. Looks very stylish from the pictures at least. Now i know G3 lacing might be utterly stupid for a front wheel but i'll give these things a bit of travel this season and we shall see how well they hold up.

Ich fahre diese am Stadtrad, problemlos, angenehmer leichter flex, nettes Upgrade; habe sie auch in lackierter Optik und ohne Off-set (aber gerade nicht verbaut). Kann nichts Negatives sagen. Wie erwähnt Anleitung beachten und klemmung drehen. Die rail-klemmung und Winkeleinstellung wirkten anfangs etwas „eigen“, da hatte ich noch die meisten Bedenken. Aber auf dem Stadtrad wird sie auch recht defensiv gefahren, keine großen Krafteinwirkungen.